SOP FOR PERSONNEL ENTRY AND EXIT PROCEDURE IN PRODUCTION
OBJECTIVE: To lay down the Procedure for Entry and Exit Procedure for Staff, Visitors, worker in Secondary Change Room of Production Area.
SCOPE: This procedure is applicable for Entry and Exit procedure for Staff, Visitors, worker.
RESPONSIBILITY: It is the responsibility of operator and production supervisors to follow the procedure as prescribed in this SOP.
It is the responsibility of production chemist/officer to ensure that all personnel entering in Production must follow the procedure as prescribed in SOP.
Manager or designee of Production Department is responsible for implementation and providing the training for entry and exit in the department.
ACCOUNTABILITY:
Head of the Production Department.
Head – Quality Assurance
PROCEDURE:
Entry Procedure for Staff/worker:
Push the door and enter in to Secondary Change Room.
Gents employee shall enter into gents change room.
All activities follow as per displayed pictorial diagram.
Remove your primary footwear & keep on their respective place.
Cross the cross over bench.
Collect your secondary footwear & wear it.
Sanitize both hands using disinfectants solution.
Then collect your secondary gowning from SS Almira & wear it following manner.
Firstly wear headgear.
Then wear Dangry.
Ensure proper gowning in mirror.
Sanitize both hands using disinfectants solution.
Pull the door handle and enter into the corridor.
From this corridor personnel proceed toward respective work places.
Exit Procedure for Staff/worker:
Push the door and enter into the Secondary Change room.
Remove the secondary gowning & keep on their respective place (Cleaned Crates, labelled with used garments) at the time of lunch break or tea break.
Remove secondary footwear & keep on their respective place.
After end of the shift secondary gowning to be kept on the crates (labelled with unclean garments) for wash.
Cross the cross over bench.
Collect your primary footwear & wear it.
Pull the door handle & exit from Secondary Change Room.
Entry Procedure for Visitors
Push the door and enter in to Secondary Change Room.
All activities follow as per displayed pictorial diagram.
Take Shoe cover & disposable cap from tray, kept on the cross over bench & wear it upon primary shoe cover & primary cap.
Wear the Nose mask.
Wear the Visitor gown with lower.
Inspect him/her in the mirror for proper gowning.
Sanitize both hands using disinfectants solution.
Pull the door handle and enter into the corridor.
From this corridor personnel proceed toward respective work places.
Exit Procedure for Visitors
The visitor coming out of the production area shall enter into visitor change room.
Cross over the bench and remove the secondary shoe cover.
Remove visitor gowning and keep in used garment bin.
Open the exit door and exit from the change room.
Entry Exit in Core Manufacturing area through Air Shower
All persons Ladies/Gents/Visitor shall enter into Air shower for entry to the core manufacturing area.
During return from the core manufacturing area all persons shall exit via return air shower.