SOP on handling of alarm system of Stability Chambers
Objective: To lay down a procedure for handling of alarm system of stability chambers.
Scope: This SOP is applicable to handling of alarm system of stability chambers.
Responsibility:
Chemist or above of QC Laboratory.
Electrician or above of Engineering department.
Security supervisor or above.
Accountability:
Head – Quality Control
Head – Engineering
Head – P&A department
Head – Quality Assurance
Procedure:
Alarm System comprises of :
Buzzer on each Stab.ility Chamber.
Alarm panel fixed in Stability room.
Alarm buzzer fixed in Security Office.
Whenever there is overshoot / undershoot of temperature or overshoot of RH with respect to set point then;
Audio alarm will be generated on particular stability chamber having temperature or RH issue.
Indicator will glow and Audio alarm will be generated in Alarm panel with respect to respective stability chamber.
Audio alarm will be generated in security office.
As Audio alarm beeps, security person shall intimate to engineering person regarding audio alarm of stability chambers.
Unit-VI Engineering person will identify the respective stability chamber with the help of alarm panel and rectify the problem.
If Engineering person is not able to rectify the problem then he shall inform to QC head to call vendor’s service engineer and further activity shall be performed as per current version of SOP No. QC-SG-018 (SOP on handling of stability chambers).