VALIDATION OF HVAC SYSTEM

VALIDATION OF HVAC SYSTEM INSTALLATION   QUALIFICATION PROTOCOL FOR AIR HANDLING UNIT & AIR DISTRIBUTION SYSTEM TABLE OF CONTENTS Sr. No Description Page No. 1 Objective 2 System / Equipment Description 3 Responsibility 4 Execution Team 5 Installation Verification 6 Installation Check 7 Documentation Requirement 8 Deviation Report 9 Installation Qualification Summary & Conclusion 10 Abbreviations 11 … Read more

MAINTENANCE OF VENTILATION SYSTEMS (EXHAUST)

OBJECTIVE            To lay down a procedure for Maintenance of Ventilation System SCOPE This SOP is applicable to Ventilation System (Exhaust).  RESPONSIBILITY Technical Supervisor / Engineer        ACCOUNTABILITY Sr.Executive / Manager                     PROCEDURE Weekly Maintenance Check condition of the belt for wear, tear and damage and replace if damaged and  clean the area with cora cloth  Ensure no air … Read more

MAINTENANCE OF VENTILATION SYSTEMS (SUPPLY)

OBJECTIVE            To lay down a procedure for Maintenance of Ventilation System SCOPE  This SOP is applicable to Ventilation System (Supply). block. RESPONSIBILITY Technical Supervisor / Engineer        ACCOUNTABILITY Sr.Executive / Manager                     PROCEDURE Weekly Maintenance Check condition of the belt for wear, tear and damage and replace if  damaged and  clean the area with cora cloth Ensure no … Read more

CLEANING OF WATER OVER HEAD TANKS & SUMPS

CLEANING OF WATER OVER HEAD TANKS & SUMPS OBJECTIVE                                               To lay down a procedure for Cleaning of Water Over Head Tanks and Sumps SCOPE  This SOP is applicable to Water Over Head Tanks and Sumps. RESPONSIBILITY             Technical Supervisor / Engineer ACCOUNTABILITY                     Sr.Executive / Manager PROCEDURE Obtain work permit for carrying out cleaning. Ensure that all … Read more

MAINTENANCE OF DEHUMIDIFIERS, BRY-AIR MAKE, MVB MODEL

OBJECTIVE                                               To lay down a procedure for Maintenance of Dehumidifier SCOPE This SOP is applicable to all Dehumidifiers. RESPONSIBILITY             Technical Supervisor / Engineer ACCOUNTABILITY                     Sr.Executive / Manager PROCEDURE Daily Maintenance Check and ensure no unusual noise form the Actuator motor, Process air & Reactivation motor. Ensure the motor should be free from dust Check and … Read more

MAINTENANCE OF SCREW CHILLER MAKE: YORK

OBJECTIVE                                               To lay down a procedure for Maintenance of Screw Chiller SCOPE This SOP is applicable to Screw Chiller. RESPONSIBILITY             Technical Supervisor / Engineer ACCOUNTABILITY                     Sr.Executive / Manager PROCEDURE Daily Maintenance  Check and ensure oil level as per the mark given on the view glass … Read more

MAINTENANCE OF DISPENSING BOOTH

OBJECTIVE         To lay down a procedure for Maintenance of Dispensing booth SCOPE This SOP is applicable to Dispensing booth. RESPONSIBILITY Technical Supervisor / Engineer        ACCOUNTABILITY Sr.Executive / Manager                     PROCEDURE Quarterly Maintenance            Check and ensure the free rotation of the blower motor shaft. Check the full load current in all phases of the motor Re greases … Read more

Submission of new SOP and changes to existing SOP

OBJECTIVE :    To provide a system for initiating a new SOP and to update an existing SOP. RESPONSIBILITY : The Department Head/Section In charge shall ensure that all SOPs pertaining to their department are prepared/updated and routed for approval. Procedure :             Submission of new SOP :                 The request for a new SOP shall be initiated … Read more

MAINTENANCE OF FINISHED GOODS STORES AIR CONDITIONING SYSTEM MAKE: BLUE

OBJECTIVE            To lay down a procedure for Maintenance of Finished Goods Stores Air Conditioning system SCOPE This SOP is applicable to Finished Goods Stores Air Conditioning System, Model: ACU20B, Capacity: 18 Ton of Refrigeration. RESPONSIBILITY Technical Supervisor / Engineer        ACCOUNTABILITY Sr.Executive / Manager                     PROCEDURE Daily Maintenance Check and ensure that the difference between inlet and … Read more

MAINTENANCE OF SAMPLING BOOTH

OBJECTIVE          To lay down a procedure for Maintenance of Sampling booth  SCOPE This SOP is applicable to Sampling booth. RESPONSIBILITY Technical Supervisor / Engineer        ACCOUNTABILITY Sr.Executive / Manager                     PROCEDURE           . Quarterly Maintenance Check and ensure the free rotation of the blower motor shaft. Check the full load current in all phases … Read more

error: Content is protected !!