Objective: To lay down a procedure for preparation of disinfectant solution. Scope This SOP is applicable for preparation of disinfectant solution at dry powder Injectable facility. Responsibility Officers /above –(Production Injectable) is responsible for preparation of disinfectant solution. Accountability Production Head shall be responsible for the compliance of the SOP. Abbreviations SOP : Standard Operating…
OBJECTIVE To lay down a procedure for Maintenance of Ventilation System SCOPE This SOP is applicable to Ventilation System (Exhaust). RESPONSIBILITY Technical Supervisor / Engineer ACCOUNTABILITY Sr.Executive / Manager PROCEDURE Weekly Maintenance Check condition of the belt for wear, tear and damage and replace if damaged and clean the area with cora cloth Ensure no air…
OBJECTIVE To lay down a procedure for Maintenance of Ventilation System SCOPE This SOP is applicable to Ventilation System (Supply). block. RESPONSIBILITY Technical Supervisor / Engineer ACCOUNTABILITY Sr.Executive / Manager PROCEDURE Weekly Maintenance Check condition of the belt for wear, tear and damage and replace if damaged and clean the area with cora cloth Ensure no…
CLEANING OF WATER OVER HEAD TANKS & SUMPS OBJECTIVE To lay down a procedure for Cleaning of Water Over Head Tanks and Sumps SCOPE This SOP is applicable to Water Over Head Tanks and Sumps. RESPONSIBILITY Technical Supervisor / Engineer ACCOUNTABILITY Sr.Executive / Manager PROCEDURE Obtain work permit for carrying out cleaning. Ensure that all…
OBJECTIVE To lay down a procedure for Maintenance of Dehumidifier SCOPE This SOP is applicable to all Dehumidifiers. RESPONSIBILITY Technical Supervisor / Engineer ACCOUNTABILITY Sr.Executive / Manager PROCEDURE Daily Maintenance Check and ensure no unusual noise form the Actuator motor, Process air & Reactivation motor. Ensure the motor should be free from dust Check and…
Read More “MAINTENANCE OF DEHUMIDIFIERS, BRY-AIR MAKE, MVB MODEL” »
PROCEDURE FOR ROUNDING OFF NUMERICAL VALUES AND REPORTING SYSTEM
OBJECTIVE To lay down a procedure for the Maintenance of the Screw Chiller SCOPE This SOP is applicable to Screw Chillers. RESPONSIBILITY Technical Supervisor / Engineer ACCOUNTABILITY Sr.Executive / Manager PROCEDURE Daily Maintenance Check and ensure oil level as per the mark given on the…
OBJECTIVE To lay down a procedure for Maintenance of Dispensing booth SCOPE This SOP is applicable to Dispensing booth. RESPONSIBILITY Technical Supervisor / Engineer ACCOUNTABILITY Sr.Executive / Manager PROCEDURE Quarterly Maintenance Check and ensure the free rotation of the blower motor shaft. Check the full load current in all phases of the motor Re greases…
OBJECTIVE : To provide a system for initiating a new SOP and to update an existing SOP. RESPONSIBILITY : The Department Head/Section In charge shall ensure that all SOPs pertaining to their department are prepared/updated and routed for approval. Procedure : Submission of new SOP : The request for a new SOP shall be initiated…
Read More “Submission of new SOP and changes to existing SOP” »
OBJECTIVE To lay down a procedure for Maintenance of Finished Goods Stores Air Conditioning system SCOPE This SOP is applicable to Finished Goods Stores Air Conditioning System, Model: ACU20B, Capacity: 18 Ton of Refrigeration. RESPONSIBILITY Technical Supervisor / Engineer ACCOUNTABILITY Sr.Executive / Manager PROCEDURE Daily Maintenance Check and ensure that the difference between inlet and…
Read More “MAINTENANCE OF FINISHED GOODS STORES AIR CONDITIONING SYSTEM MAKE: BLUE” »
OBJECTIVE To lay down a procedure for Maintenance of Sampling booth SCOPE This SOP is applicable to Sampling booth. RESPONSIBILITY Technical Supervisor / Engineer ACCOUNTABILITY Sr.Executive / Manager PROCEDURE . Quarterly Maintenance Check and ensure the free rotation of the blower motor shaft. Check the full load current in all phases…
OBJECTIVE To lay down a procedure for Maintenance of Raw Water Distribution System SCOPE This SOP is applicable for Raw Water Distribution System. RESPONSIBILITY Technical Supervisor / Engineer ACCOUNTABILITY Sr.Executive / Manager PROCEDURE Monthly Maintenance Check the motorized valves functioning of auto valves. Check free rotation of auto valve manually. Check and ensure no water…
OBJECTIVE To lay down a procedure for Maintenance of Ventilation System SCOPE This SOP is applicable to Ventilation System (Supply & Exhaust). RESPONSIBILITY Technical Supervisor / Engineer ACCOUNTABILITY Sr.Executive / Manager PROCEDURE Weekly Maintenance Check condition of the belt for wear, tear and damage and replace if damaged and clean the area with cora cloth Ensure…
Read More “MAINTENANCE OF VENTILATION SYSTEMS (SUPPLY & EXHAUST)” »
OBJECTIVE To lay down a procedure for Maintenance of Dust Collection system SCOPE This SOP is applicable to all Dust Collection system. RESPONSIBILITY Technical Supervisor / Engineer ACCOUNTABILITY Sr.Executive / Manager PROCEDURE Weekly Maintenance Check and ensure the belts are not loose or excessive tight. Ensure no air leakage from the rexine cloth connection from…
Read More “MAINTENANCE OF DUST COLLECTION SYSTEM WHIRL WIND MAKE” »
OBJECTIVE To lay down a procedure for Maintenance of Condenser water Pumps/ Chilled Water Pumps SCOPE This SOP is applicable to A/C plant Condenser/Chilled Water Pumps. RESPONSIBILITY Technical Supervisor / Engineer ACCOUNTABILITY Sr.Executive / Manager PROCEDURE Daily Maintenance Clean the motor, pump, pipelines etc. externally with Cora cloth. Check any abnormal sound and overheating from…
Read More “MAINTENANCE OF CONDENSOR WATER PUMPS/ CHILLED WATER PUMPS, MAKE: BEACON” »
OBJECTIVE To lay down a procedure for Maintenance of Bore well Pump SCOPE This SOP is applicable to bore well Pump, Capacity: 34 m3/HR. RESPONSIBILITY Technical Supervisor / Engineer ACCOUNTABILITY Sr.Executive / Manager PROCEDURE Monthly Maintenance Clean the contactors with CTC / CRC. Ensure the pump load should be in between 7.5-10 Amps Ensure no…
Read More “MAINTENANCE OF BOREWELL PUMP MAKE: KSB, MODEL: UMA-C150” »
OBJECTIVE To lay down a procedure for Disposal of Dust collected from Dust Collection System. SCOPE This SOP is applicable to all Dust Collection Systems. RESPONSIBILITY Technical Supervisor / Engineer ACCOUNTABILITY Sr.Executive / Manager PROCEDURE Frequency Dust is removed system wise, once in a Month. Dust is removed during product change over cleaning Operation Stop…
Read More “DISPOSAL OF DUST COLLECTED FROM DUST COLLECTION SYSTEM” »
MAINTENANCE OF COOLING TOWER OBJECTIVE To lay down a procedure for Maintenance of Cooling Tower SCOPE This SOP is applicable to Cooling Tower. RESPONSIBILITY Technical Supervisor / Engineer ACCOUNTABILITY Sr.Executive / Manager PROCEDURE Daily Maintenance Check for any vibration and abnormal noise from the Total unit. Check and ensure free rotation of Water Distributor. Blow…
OBJECTIVE To lay down a procedure for Maintenance of Compressed Air Distribution SCOPE This SOP is applicable to Compressed Air Distribution. RESPONSIBILITY Technical Supervisor / Engineer ACCOUNTABILITY Sr.Executive / Manager PROCEDURE Daily Maintenance Clean the filter bowl externally with dry Cora cloth Ensure no waste material should be lie on bottom of the trenches &…
RAW MATERIAL COLD STORAGE Raw materials must be stored in controlled temperature environments to guarantee their durability and uphold the quality and safety of the final products. This blog explores the importance of cold storage for raw materials, the advantages it offers, and the essential factors that businesses should consider when implementing or enhancing their…
