Cleaning of Raw Material Store, Packing Material Store and Finished Goods Store
Procedure
- Collect all the waste material, dust settled over tables, floors, containers, furniture, fixtures & walls with the help of a vacuum cleaner.
- Clean the door, window glasses, door closures, handles, and all the hinges of the door using a clean dry duster followed by a wet duster and again with a dry duster.
- If a weighing balance is present in the processing room, clean it by using a wet duster followed by a dry duster.
Handling of Spillage of Materials
- Clean the pallets, trolleys, etc. using a wet duster followed by a clean dry duster.
- Remove the dust from the switchboards, utility pendants using the vacuum cleaner.
- Clean the SOP stand using clean dry duster.
- Clean the accessories box using the wet duster followed by clean dry duster.
- Clean the ceilings of Air Handling Unit (AHU) supply/return grilles with a pipe brush and vacuum cleaner (if applicable).
- Clean the ceiling of whole area including racks, shelves using wet duster followed by a clean dry duster.
- Clean and mop the entire floor twice using disinfectant solution (2.5 % Dettol/Savlon) or any other disinfectant (if required) as per SOP.
- Clean the tube light fixtures using wet duster followed by a clean dry duster.
- Clean the walls, coving, corners of the entire area using wet duster followed by clean dry duster.
- Clean the cameras of the entire area using wet duster followed by clean dry duster.
- Collect all the waste from the waste bin into a poly bag and send to the scrap area. Clean the waste bin with wet duster followed by clean dry duster.
- Clean the drain points using disinfectant solution.
- Enter the cleaning activity details in the Area Cleaning Log Book.
Frequency: Twice a day or as when required