Pharma guidance Mobile App
Pharma guidance Mobile App https://play.google.com/store/apps/details?id=com.smartwebarts.pg
Tag: BOGOTÁ
Why disinfectant sterilization required in pharma injectable?
Disinfection Disinfection is a process that is designed to kill actively growing and vegetative microbial microorganisms to a certain level, and it does not, unless the disinfectant is classified as a sterilant, apply to bacterial endospores. Disinfection a process that eliminates many or all pathogenic microorganisms, except bacterial spores, on inanimate objects and reduces the…
Read More “Why disinfectant sterilization required in pharma injectable?” »
SOP on Transfer of Technology for Manufacturing process
SOP on Transfer of Technology for Manufacturing process Objective: To lay down the procedure for Transfer of Technology for Manufacturing Process. Scope: This procedure is applicable for Transfer of technology (i.e. for Manufacturing process) from sending unit (F R&D) to receiving site (Manufacturing facility ) Responsibility: Responsibility of Sending Unit (F R&D ) are :…
Read More “SOP on Transfer of Technology for Manufacturing process” »
INSTALLATION QUALIFICATION PROTOCOL FOR AIR HANDLING UNIT
AIR HANDLING UNIT & AIR DISTRIBUTION SYSTEM The air handling unit (AHU-GF-02) is a recirculation system, in double-skin modular construction. AHU will have an extruded aluminum frame with a sandwiched panel of G.I. sheet duly pre-coated from the outside & 43 mm thick PUF filled in between. Fresh air enters through a 10µ fresh air…
Read More “INSTALLATION QUALIFICATION PROTOCOL FOR AIR HANDLING UNIT” »
DESIGN QUALIFICATION FOR PURIFIED WATER STORAGE & DISTRIBUTION SYSTEM
FOR PURIFIED WATER STORAGE & DISTRIBUTION SYSTEM The Purified Water from the upstream generation System is stored in a Vertical Jacketed Storage tank From the storage tank the water is then supplied to various user points in the Production area. The Purified Water storage tank is controlled with the help of a capacitance-type level transmitter,…
Read More “DESIGN QUALIFICATION FOR PURIFIED WATER STORAGE & DISTRIBUTION SYSTEM” »
USFDA Critical Observation 2019 in Brief – In pharmaceutical Company
USFDA WARNING LATTER 2019 – DRUGS Reference Number Short Description Critical Observation and discripancies 21 CFR 211.22(d) Procedures not in writing, fully followed The responsibilities and procedures applicable to the quality control unit are not in writing and fully followed. 21 CFR 211.192 Investigations of discrepancies, failures There is a failure to thoroughly review…
Read More “USFDA Critical Observation 2019 in Brief – In pharmaceutical Company” »
SOP on Fogging of Microbiology Testing Areas
Objective: To lay down the procedure for Fogging of Microbiology Testing Areas Scope: This SOP is applicable for Fogging of Microbiology Testing Areas in Microbiology Laboratory. Responsibility: Chemist or above of Microbiology Laboratory: Head – Microbiology section. Accountability: Head – Quality Control. Procedure: Operation Perform the Fogging of Microbiology once in a week at the…
Spoken English Guru Chart
Referance:
SOP on cleaning and operating procedure of bursting strength tester
Objective: To lay down the cleaning & operating procedure of bursting strength tester. Scope: This SOP is applicable for the cleaning & operating procedure of bursting strength tester in quality control laboratory. Responsibilities: Chemist or above of QC laboratory in Packaging material Quality Control section is responsible for carrying out the cleaning & analysis as…
Read More “SOP on cleaning and operating procedure of bursting strength tester” »
Effluent Treatment Plant (ETP)
Effluent Treatment Plant (ETP) Effluent Treatment Plants (ETP) play a vital role in this endeavor, serving as essential systems for the treatment and purification of industrial wastewater. This article explores the importance, operation, and environmental implications associated with Effluent Treatment Plants. Effluent Treatment Plants are crucial for the responsible and sustainable management of industrial wastewater….
Validation Observations Recording for steam steriliser and load Pattern
Validation Observations for steam sterilizer and load Pattern Recording Of Observations For Revalidation Steam Quality Tests 1. Steam Non-Condensable Gas Test When the temperature of the water in the container reaches 70-75°C close the needle valve. Note the volume of gas collected in the burette (Vb) and the volume of water collected in the measuring…
Read More “Validation Observations Recording for steam steriliser and load Pattern” »
Handling of Microbiological Data Deviation in Microbiology Laboratory
Objective: To lay down the procedure for Handling of Microbiological Data Deviation in Microbiology Laboratory. Scope: This procedure is applicable to environmental monitoring excursions (namely Passive air sampling, Active air sampling, Surface sampling, Personnel monitoring, and Compressed gas monitoring)obtained during the Environmental monitoring, Sterility testing, Bacterial Endotoxin Test, Bioburden, Microbial Limit test, Liquid borne particulate…
Read More “Handling of Microbiological Data Deviation in Microbiology Laboratory” »
OOS in Microbiology
OOS in Microbiology Out-of-specification (OOS) occurrences pertain to situations where microbiological test outcomes deviate from predetermined acceptance criteria or specifications. These occurrences can arise due to a variety of factors, spanning from technical complications to procedural mistakes. The identification and resolution of OOS events play a crucial role in upholding the dependability of microbiological data,…
Performance Qualification Report for steam steriliser
Performance Qualification Report for Steam Sterilizer Performance Qualification is verified that all test cases required by the protocol are completed, reconciled, and included in the qualification summary report. Signatures in the block below indicate that all items in this Qualification Report have been reviewed and found to be acceptable. SUMMARY REPORT Data generated during qualification…
Read More “Performance Qualification Report for steam steriliser” »
Load Pattern & Justification for steam sterilizer
Load Pattern & Justification for Steam Sterilizer APPROVAL SIGNATURES The signing of this approval page of the load pattern indicates agreement with the qualification approach described in the PQ protocol. If any modification in the load pattern becomes necessary, a revision through change control shall be prepared, checked, and approved. Wherever applicable revalidation of the…
Read More “Load Pattern & Justification for steam sterilizer” »
Protocol for steam sterilizer /Autoclave and load Pattern
Steam sterilizer /Autoclave (HPHV) Steam sterilizer (H.P.H.V. ) is for sterilization and drying of garments, rubber stopper holding canisters, filling machine parts, filtration accessories, and previously washed and siliconized rubber stoppers. H.P.H.V. Steam sterilizer is installed in the vial washing room. Basic Mode of Operation The main action of H.P.H.V. Steam sterilizer on all the…
Read More “Protocol for steam sterilizer /Autoclave and load Pattern” »
US FDA Data Integrity
Data Integrity : The increasingly complex regulatory environments have forced laboratories to adopt a new mindset to compliance and auditing… moving away from traditional instrument validation approaches and consolidating both the instrument data as well as the instrument support across the full spectrum of their lab assets. Contents What is Data Integrity? Regulatory Environments…
Things to Do When FDA Staff Are on Site to Conduct an Inspection
The 10 Best — and 10 Worst — Things to Do When FDA Staff Are on Site to Conduct an Inspection FDA Expectations • FDA conducts inspections to assess compliance with applicable laws and regulations • FDA expects: – Investigators to conduct inspections in a reasonable manner – Industry to welcome the investigator professionally and…
Read More “Things to Do When FDA Staff Are on Site to Conduct an Inspection” »
Vendor Qualification SOP
Vendor Qualification SOP To provide a procedure for identification, selection, evaluation and qualification of Raw Material (Active and Inactive) and Primary / Printed Packaging material vendors. Responsibility of Vendor Qualification SOP : Head-SCM for identification and selection of Vendor. Head – Quality Control for testing of samples. Head –…
Sanitization & Cleaning SOP ( RO )
Chemical Sanitization Procedure for RO first Pass Objective : To Disinfectant the Bacteria in RO membrane Scope :- Procedure : Prepare (0.1 – 1) % Minncare Solution in any solution preparation tank having the capacity of 300 Ltr { Use 300ml of 100% Minncare in 300 Ltrs of Purified Water at Ambient Temp} Connect…