Home / Production / SOP on operation of packing conveyer belt

SOP on operation of packing conveyer belt

  • Objective
  • To lay down the procedure for the operation of packing conveyer belt.
  • Scope:
  •  The SOP is applicable for the operation of packing conveyer belt installed in the packing hall of sterile injectables facility.
  •  Responsibility
  • Officers and above-Production
  • Accountability
  • Production Head
  • Abbreviations
  • MCB : Miniature Circuit breaker
  • Procedure
  • Ensure that the packing conveyer belt is properly cleaned before starting the packing operation.
  • Ensure that line clearance has been done before starting the packing operation.
  • Switch on the Power supply of the packing conveyer belt from the mains.
  • Switch on the control panel of the conveyer belt by moving the MCB to on position.
  • Press Run/Stop Switch once to start the conveyer belt.
  • Adjust the speed of the conveyer belt by pressing the control switches on the control    panel.
  • Press Run/Stop switch once to stop the packing belt at the end of the packing activities.
  • Switch off the control panel of the conveyer belt by moving the MCB to off position.
  • Switch off the Power supply of the packing conveyer belt from the mains.
  • Clean the packing conveyer belt as per Sop on cleaning of conveyer belt.
  • Record the operation and cleaning details in the Equipment Operation cleaning & maintenance Log Book format No: QASG040/F01-00 and Batch Packing Record and get it checked by the production officer/supervisor.
  • Forms and Records (Annexures)
  • Not Applicable
  • Distribution
  • Master copy –   Quality Assurance
  • Controlled copies- Quality Assurance, Production, Quality Control
  • History
    Date Revision Number
    Reason for Revision
    00 New SOP

About Pharma Editor

Check Also

Tablets In Pharma Industry

Tablets In Pharma Industry NOTE- The provisions of this monograph do not necessarily apply to …