Operating Procedure of Dehumidifier

  • Objective:To lay down an Operating Procedure for Dehumidifier
  • Scope:This Standard Operating Procedure is applicable to the formulation plant of Pharmaceutical Company.
  • Responsibility
    • The Concerned Technician shall follow the Operating Procedure as per this SOP
    • The Officer/Executive-Engineering shall be responsible for implementation of the procedure as per this SOP.
  • Accountability: Head-Engineering and QA shall be accountable for compliance of the procedure as per this SOP.
  • Abbreviations and Definitions:
  • MCC : Machine Control Center
  • MCB : Miniature Circuit Board
  • RH : Relative Humidity
  • Procedure
    • Pre Startup Checkup
      • Ensure Power supply shall “ON” from MCC panel for all deparment
      • Ensure Chilled Water circulation is going on. Working Pressure of Chilled water shall be more than 1 Kg/Cm2.
      • Ensure that steam inlet valve should be open.
      • Ensure that inlet and outlet damper of dehumidifier should be open.
    • Starting Procedure
      • Switch on the MCB from the panel
      • Set the desire Temperature and RH on the temperature and RH controller.
      • Switch “ON” the selector switch, then process and react blower will be on.
      • Switch “ON” the heaters.
      • Ensure that there are no leakages from the door gaskets.
    • Forms and Annexure:
    • Not Applicable
  • Distribution:
    • Master Copy : Documentation Cell
    • Controlled Copies :Engineering, Production, Quality Assurance,Warehouse,Quality control and Administration and House Keeping.
  • History:
DateRevision NumberReason for revision
 –00New SOP

Pharma More Jobs and post Please click here