Sunday , July 5 2020
Home / Validation & Qualification / Validation / Cleaning Validation(CV)

Cleaning Validation(CV)

Establishment of Limits in Cleaning Validation

Establishment of Limits in Cleaning Validation The  rationale for selecting limits for product residues should be logical and based on the materials involved and their therapeutic dose. The limits should be practical, achievable, and verifiable. In establishing product residual limits, it may not be adequate to focus only on the …

Read More »

Sampling, Rinsing, Rinse Samples and Detergents in cleaning Validation

Sampling, Rinsing, Rinse Samples and Detergents in cleaning Validation Sampling: There are two general types of sampling that are considered to be acceptable, direct surface sampling (swab method) and indirect sampling (use of rinse solutions). A combination of the two methods is generally the most desirable, particularly in circumstances where …

Read More »

Documentation in cleaning validation

Documentation in cleaning validation 1.0 Detailed cleaning procedure(s) are to be documented in SOPs 2.0 A Cleaning Validation Protocol is required to define how the cleaning process will be validated. It should include the following: The objective of the validation process; Responsibilities for performing and approving the validation study; Description …

Read More »

Validation of Cleaning Processes

Validation of Cleaning Processes  As a general concept, until the validation of the cleaning procedure has been completed, the product contact equipment should be dedicated. In a multi-product facility, the effort of validating the cleaning of a specific piece of equipment which has been exposed to a product and the …

Read More »

Levels of Cleaning in cleaning Validation

Levels of Cleaning in cleaning Validation Introduction The manufacturing process of an Active Pharmaceutical Ingredient (API) typically consists of various chemical reaction and purification steps followed by physical changes. In general, early steps undergo further processing and purification and so potential carryover of the previous product would be removed. The level of cleaning …

Read More »

Cleaning Validation Protocol

Cleaning Validation Protocol CONTENTS S. No. Topic Page No. 1.0 Protocol Preparation and Approval Sheet 2.0 Objective 3.0 Scope 4.0 Responsibility 5.0 Validation Team 6.0 Abbreviations and Definitions 7.0 Cleaning Validation Approach 7.1 Selection of Products 7.2 Selection of Equipments 7.3 Type  Cleaning after every five consecutive batches of the …

Read More »