Sunday , July 5 2020
Home / QA & QC / Operating procedure for ultrasonic bath. Quality assurance

Operating procedure for ultrasonic bath. Quality assurance

  • Operating procedure for ultrasonic bath. Quality assurance
  • OBJECTIVE
  • To lay down a procedure for operation and cleaning of ultra sonic bath
  • SCOPE
  • This SOP shall be applicable for operation and cleaning of Ultra sonic bath.
  • RESPONSIBILITY
  • Quality Control Executive/Officer
  • ACCOUNTABILITY
  • Head-Quality Control.
  • PROCEDURE  FOR CLEANING
  • Switch OFF the equipment and drain out the water from the batch.
  • Clean the batch with the help of soap solution, followed by water.
  • OPERATION
  • Fill the equipment with water up to the required level.
  • Connect the equipment to stabilised power supply.
  • Place the sample in the chamber of the equipment.
  • Press and hold the up & down arrow keys to increase and decrease the temperature and time.
  • Press and hold the mode button to switch the timer, heater and sonic volume.
  • The equipment will automatically  shut OFF after the set time.
  • Forms and Records (Annexures)
  • Not Applicable
  • Distribution
  • Master copy –  Quality Assurance
  • Controlled copies- Quality Assurance, Production, Quality Control.engineering
  • History
    Date Revision Number Reason for Revision
    00 New SOP

For More Updates Visit –https://pharmaguidances.com/jobs/

About Pharma Editor

Check Also

Investigating Out-of-Specification

Investigating Out-of-Specification IDENTIFYING AND ASSESSING OOS TEST RESULTS — PHASE I: LABORATORY INVESTIGATION PHASE II:  …