Mapping of the Environmental Conditions (Temperature and Relative Humidity) Objective : The objective of this validation study is to provide a document evidence of Temperature and Relative Humidity distribution in Ware House area against predetermined acceptance criteria. Scope : The scope of this protocol shall be applicable at formulation Plant. The validation study of the Temperature … Read more
SOP for Preparation of Validation and Qualification Protocols Objective : To lay down a procedure for Preparation of Validation and Qualification protocols applicable to all aspects of manufacturing processes, equipments, control systems (including computer hardware and software), utilities, facility, temperature mapping, Shipping and any significant changes to the above mentioned elements which may affect the quality … Read more
SOP FOR MAJOR ACCIDENT/INCIDENT REPORTING PURPOSE : An accident always results in diversion of resources from any normal business activity. In certain cases, publicity generated from an accident can result in a damaging effect on the image of the company. Thus it is imperative that top management is informed immediately about such accidents so that appropriate … Read more
SOP FOR ACCIDENT /INCIDENT REPORTING PURPOSE : Any Accident / Incident is a symptom, of some thing wrong in the system. Detailed investigation helps in uncovering the deficiencies in the system and find out the root cause which should be eliminated to prevent reoccurrence of such accidents / incidents. Hence, all accidents / incidents resulting in … Read more
SOP FOR EQUIPMENT TAGGING SYSTEM PURPOSE : Accidents are often caused due to operation of some equipment at the time when people are attending / working on it due to improper communication about the equipment being given or taken for maintenance. Tags tied on the operating devices of equipments states about the status of the … Read more
SOP FOR MAINTENANCE WORK PERMIT PURPOSE : The purpose of this procedure is to establish proper and adequate communication between department originating a request for some maintenance / civil jobs and personnel actually performing these jobs. SCOPE : For all jobs to be carried out in the plant premises where there is an interaction of … Read more
SOP ON WORKING AT HEIGHT PURPOSE :- To carry out maintenance & civil jobs at height more than 12 feet in a safe manner. SCOPE :- To ensure safe standards are followed for working at height with in the plant & factory premises. PROCEDURE :- It will be the responsibility of the Area supervisor to ensure … Read more
SOP ON VESSEL ENTRY PERMIT PURPOSE : Entry into a vessel or confined space is a potentially hazardous job and hence requires a thorough consideration of various aspects before someone is authorised to perform it. SCOPE : The vessel entry permit shall be applicable to all process reactors, mixing vessels, ANF’s, TVD’s, Storage Tanks, Ventilation … Read more
SOP ON EXCAVATION PERMIT PURPOSE : Excavation work within the factory premises involves the hazard of puncturing / breaking electric cables, pipelines and possible consequences like electrocution, chemical exposure, chemical percolation to ground and serious breakdown of manufacturing activities. The purpose of this permit procedure is to prevent the possibility of such mishaps while performing … Read more
SAFETY PROCEDURE MANUAL Certain work activities carry with them a degree of hazard which is considered more than normal. The purpose of this procedure is to identify these work activities. The use of Fire Permit is intended to ensure that every reasonable effort has been made to minimize the risk before the work to be … Read more