USER REQUIREMENT SPECIFICATION OF PRESSURE VESSEL
| S. No | Table of Contents |
| 1 | General |
| 2 | Salient Features |
| 3 | Operational requirements |
| 4 | Utilities |
| 5 | Maintenance |
| 6 | Documentation |
| 7 | Training |
| 8 | Packaging |
| 9 | Deviations |
| 10 | Delivery |
TECHNICAL
| S. No. | Parameters | Requirement Specifications |
| 1
1.1. |
GeneralEquipment No’s. |
|
| 1.2 |
Description |
|
| 1.3 |
Use |
|
| 1.4 |
Field Identification
|
To be installed in medicament preparation room in soft gelatin block.
(i) Room Temperature NMT 25ºC and RH NMT 60 % (ii) Non flame proof. |
| 1.5 | Glossary | |
| 2. |
Salient FeaturesGeneral |
|
| 2.1 |
Material of Construction |
All the contact parts preferably should be of SS 316L. |
| 2.2 | Finish | Internal / External – NLT 220/NLT 180 Grit. |
| 3. |
Operational requirements |
|
| 3.1 | Capacity | Working Capacity 150 Ltrs. |
| 3.2 | Control Parameter | Operational at the working pressure upto 1.0 kg. / cm2. |
| 4.
|
Utilities
|
To provide utilities at ONE POINT is user’s responsibility. Supplier to give details and drawings for exact size, location, type, capacity etc. of the utilities required. |
| 5.
|
Maintenance
|
Supplier should provide (at minimum) the following maintenance instructions,
· Daily checks on machine · Cleaning procedures |
| 6. | Documentation
|
· Layout drawings.
· MOC certificates. · Vendor’s QA certificates at the time of delivery. |
| 7.
7.1 |
Training
Start up support
|
Supplier to train the respective technical associates of Company on operation, maintenance and cleaning of the equipment wherever applicable. |
| 7.2 |
Post start up support |
Telephone / Fax / E mail ID / Address
Replacement parts availability list (normal lead times shall be listed). |
| 8. | Packaging | Shall be describe about shipment packing |
| 9. | Deviations | Any deviation from URS shall be highlighted. |
| 10. | Delivery | Company Address |