Pre-dispatch inspection

What is Pre-dispatch inspection? Pre-dispatch inspection is a step taken by manufacturers to inspect finished products before dispatch of the finished product for sale and distribution in the market for the supply of medicine to user points. The purpose of Pre-dispatch inspection is: Check the quantity and quality of the finished product. Check the product … Read more

Cleaning of Dispensing Area during Product Changeover

Cleaning of Dispensing Area during Product Changeover The area cleaning during Product Changeover: Start the cleaning operation of the ceiling and then to walls from top progressing to downwards. Clean the door and window glasses using a wet duster soaked with disinfectant solution. Clean the doors, door closure handles, and all the hinges of the … Read more

Dispatch of Finished Goods

Dispatch of Finished Goods Procedure Arrange the pallets in the warehouse in an orderly manner. Place the finished goods, product wise on the pallets in the Finished Goods store. Arrange one product on one pallet. Place the batch of the product wise. After QC and QA release of the batch as per the procedure defined … Read more

Inspection, Sampling and Storage of Packing material

Inspection, Sampling, and Storage of Packing material Receipt and Inspection of Packing material Containers Upon receipt of packing material, the same shall be placed in the quarantine store attached to the Packing Material Store. In-charge of the Packing Material Store shall inform the QC Department for the inspection of containers and taking of samples for … Read more

Handling of Spillage of Materials

Handling of Spillage of Materials Procedure Spillage of any material shall be handled immediately when observed and effectively as per the procedure mentioned below  : The personnel working in the concerned department shall immediately inform the Incharge of the concerned department about the spillage of material. The concerned department Incharge shall inform QA about the … Read more

Entry & Exit procedure in warehouse area

Entry & Exit procedure in the warehouse area Push the door of the primary changing room and enter the room. Remove your street footwear and unwanted articles like wristwatches, ornaments, etc., and keep them in respective lockers. Sanitize your feet by using a soak system having disinfectant. Cross the cross-over bench (COB) as displayed in … Read more

Issuance of Packing Materials and transfer of Issued materials from Packing Material Store to Production

Issuance of Packing Materials and transfer of Issued materials from Packing Material Store to Production Procedure On the receipt of the requisition slip from the concerned production personnel for the manufacture of a product, the store In-charge shall ensure that the requisition slip bears the signatures of all the concerned persons. The packing Material store … Read more

Cleaning of Raw Material Store, Packing Material Store and Finished Goods Store

Cleaning of Raw Material Store, Packing  Material Store and Finished Goods Store Procedure Collect all the waste material, dust settled over tables, floors, containers, furniture, fixtures & walls with the help of a vacuum cleaner. Clean the door, window glasses, door closures, handles, and all the hinges of the door using a clean dry duster … Read more

Dispensing of raw materials and transfer of dispensed materials from RM store to Production

Dispensing of raw materials and transfer of dispensed materials from RM store to Production Pre-start-up activity for dispensing & Issuance of Raw material: On the receipt of the requisition slip from the production department for the manufacture of a product, the store personnel shall ensure that the requisition slip bears the signature of all the … Read more

Stock Rotation of Raw Materials, Packing Materials and Finished Goods on the “First-in, First-out” basis

Stock Rotation of Raw Materials, Packing Materials, and Finished Goods on the “First-in, First-out” basis Objective To lay down a procedure to ensure proper stock rotation of Raw materials, Packing Materials, and Finished Goods so that the stock rotation of the materials may be on the “First-in, First-out” basis. Scope This Standard Operating Procedure is … Read more

Inventory Control of Materials and Components

Inventory Control of Materials and Components Procedure Raw Material Store, Packing Material Store and Finished Goods Store shall maintain proper records with respect to the Inventory Control of Materials and Components. Inventory Control regarding Raw Materials:-The following records shall be maintained by the Incharge of the Raw Material Store in which necessary inventories shall be … Read more

Warehouse (Stores)

Warehouse (Stores) Warehousing is a complex and dynamic field that plays a critical role in maintaining the integrity and safety of products. Adhering to regulatory standards, and implementing best practices, Warehouses or stores can contribute to the overall efficiency of the supply chain. The Importance of Warehousing: Warehouses or stores serve as the central hub … Read more

All Post URL of Drugs formulations

Drugsformulations -

All Post URL of Drugs formulations Tablets MFR of Albendazole Tablets – (drugsformulations.com) MFR of Alfacalcidol & Calcium Carbonate Tablets (drugsformulations.com) MFR of Sildenafil Citrate Tablets (drugsformulations.com) MFR of Paracetamol & Dicyclomine HCl Tablets – (drugsformulations.com) MFR of Dextromethorphan, Bromhexine, Chlorpheniramine Maleate & Guaifenesin  Tablets (drugsformulations.com) Dextromethorphan (drugsformulations.com) Spiramycin Tablet (drugsformulations.com) MFR of Propranolol Hydrochloride Tablet (drugsformulations.com) Norethisterone Tablet (drugsformulations.com) Metformin … Read more

List of Documents required for Store/warehouse (GMP Compliances)

A 6 -

   

LINE CLEARANCE CHECKLIST FOR VACUUM CLEANER

LINE CLEARANCE CHECKLIST FOR VACUUM CLEANER Dosage Form: Date / Time: Product: Batch No.  : Previous Product: Batch No.  : Vacuum cleaner ID No.: Stage areas / room & equipment Checks Checked by Production Date & Time Counter checked By Quality Assurance Date & Time Vacuum cleaner Equipment ID No.: _______________ Ensure the absence of … Read more

Good storage practices for pharmaceuticals as per regulatory Guideline

Good storage practices for pharmaceuticals as per regulatory Guideline 1. Introduction 2. Glossary 3. Personnel 4. Premises and facilities 5. Storage requirements 6. Returned goods 7. Dispatch and transport 8. Product recall 1. Introduction The storage, transportation and distribution of pharmaceuticals. The stability testing of pharmaceutical products containing well-established drug substances in conventional dosage forms … Read more

 SOP on Receiving and storages of finished goods from production area

SOP on Receiving and storages of finished goods from production area Objective of SOP: To lay down a procedure for receiving and storages of finished goods (Oral & Injectable) from production area. Scope: This SOP is applicable for receiving & storages of finished goods (Oral & Injectable) in warehouse area of formulation plant of (Pharmaceutical … Read more

SOP for Issuance of Raw material

SOP for Issuance of Raw material Raw materials are the foundation of pharmaceutical manufacturing. These essential components are sourced from various suppliers and play a crucial role in the quality and efficacy of the final product. Ensuring the purity and integrity of raw materials is vital to meet regulatory standards and deliver safe medications to … Read more

Dispatch of Finished Goods

Dispatch of Finished Goods Objective of this SOP – Dispatch of Finished Goods: To lay down a procedure for dispatching finished goods from the finished goods warehouse. Scope: This SOP is applicable for the finished goods warehouse of the formulation plant Responsibility: Finished Goods Store personnel shall be responsible to follow and implementing the procedure … Read more